PACK BEARING BALL AND CAGE WITH CLEAN SHORTENING COMPOUND

TM 9-2835-255-34

NO. 1 BEARING SEAL/PACKING RETAINER REPLACEMENT (Sheet 17 of 21)

CAUTION

Do not handle bearing or bearing races

with bare hands. Damage to bearing or

bearing races may result. Use clean cotton

gloves.

Bearing failure will occur if thrust marks are

not correct.

12. PACK BEARING BALL AND CAGE WITH CLEAN

SHORTENING COMPOUND. ASSEMBLE BALL AND

CAGE AND INNER RACES (1) TO OUTER RACE (2)

WITH "V" THRUST MARK (3) ON INNER RACES (1)

POINTING OPPOSITE TO "V" THRUST MARK (4) ON

OUTER RACE (2).

13. INSTALL ASSEMBLED BEARING (5) INTO

SLEEVE BUSHING (6) WITH SLOT (7) IN BEARING

OUTER RACE POSITIONED TO ENGAGE ANTI-

ROTATION PIN (8). HOLD BEARING (5) IN SLEEVE

BUSHING (6) WITH INSTALLER TOOL (9). SECURE

WITH THREE SLAVE BOLTS (10) GOING INTO

THREADED HOLES (11) OF SLEEVE BUSHING (6).

Go on to Sheet 18

5-70

Change 6