REMOVE PACKING RETAINER

TM 9-2835-255-34

NO. 1 BEARING SEAL/PACKING RETAINER REPLACEMENT (Sheet 8 of 21)

Use caution when using arbor press.

Improper tools, or tools not properly

aligned may cause injury to personnel or

damage to parts or equipment.

8. REMOVE PACKING RETAINER (1) FROM INLET

HOUSING (2) USING POSITION NO. 1 SEAL RE-

MOVAL TOOL (3) AND ARBOR PRESS.

Cut safety wire and remove four bolts (5) from

inlet housing (2).

Position inlet housing (2) nose down on base

of arbor press.

Insert four legs of position No. 1 seal removal

tool (3) into four bolt hole (6).

Carefully press packing retainer (1) from inlet

housing (2).

Go on to Sheet 9

5-61

Change 6