REMOVE LOW PRESSURE CASE AND STATOR ASSEMBLY (BOTTOM HALF)

TM 9-2835-255-34

LOW PRESSURE ROTOR AND HOUSING ASSEMBLY (COMPRESSOR) AND HIGH PRESSURE

AXIAL COMPRESSOR AND ROTOR CLEANING (Sheet 10 of 21)

REMOVE TUBE TEE (l), FLARED CONI-

17.

CAL SEAL (2), TWO BOLTS (3), MENDING

PLATES (4), AND SPACERS (5).

18. REMOVE LOW PRESSURE CASE AND

STATOR ASSEMBLY (BOTTOM HALF) (6).

a. Remove two screws (7) and nuts (8) from

inlet housing (9).

b. Remove 14 bolts (10) and lockwashers

(11) from housing (12).

c. Have assistant support low pressure case

and stator assembly (bottom half) (6), and

remove two bolts (13) and nuts (14) from

each side.

d. Remove low pressure case and stator

assembly (bottom half (6).

Goon to Sheet 11

Change 4 5-43