 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
FORWARD ENGINE MODULE REPLACEMENT (Sheet 8 of 10)
5. INSTALL ELBOW (1) AND TEE (2).
a. Install elbow (1) in housing (3).
b. Install new flared conical seal (4) on
nipple (5). Install tee (2) on nipple (5) and
tighten nut (6).
6. INSTALL LIFTING SLINGS (7, 8) ON
FORWARD MODULE (9).
a. Remove pin (10) from shackle (11), aline
shackle (11) with hole in block (12), and
install pin (10) in shackle (11).
b. Install sling hook (13) on pin (14).
WARNING
7. INSTALL MODULE (9) ON STAND (15).
a. Move module (9) under support (16) until
hoist hook (17) is near chain hook (18).
Remove sling (8) from hoist hook (17).
Hook sling (8) to chain hook (18).
b. Lower module (9) until sling (7) is slack.
Remove sling hook (19) from shackle (11)
on sling (8).
c. Remove pin (20) from shackle (21).
Remove shackle (21) from ring (22) and
put on first chain link (23). Install
pin (20).
Go on to Sheet 9
5-20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals