 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
FORWARD ENGINE MODULE REPLACEMENT (Sheet 6 of 10)
NOTE
If link (1) has an identification plate (2), do step 13.
13. TRANSFER PLATE (2) FROM OLD
MODULE (3) TO NEW MODULE (3).
a. Remove two screws (4) and lockwashers
(5). Remove plate (2)
b. Install plate (2) on link (1) of new module
(3) with two screws (4) and new
lockwashers (5).
14. REMOVE LINK (1) FROM OLD MODULE.
a. Remove lockpin (6) and pin (7).
b. Remove two cotter pins (8) and pin (9).
Remove link (l).
15. REPEAT STEP 14 FOR NEW MODULE (3).
INSTALLATION:
1. INSTALL NEW LINK (1) WITH PLATE (2)
ON NEW MODULE (3). INSTALL OLD
LINK (1) WITHOUT PLATE (2) ON OLD
MODULE (3).
a. Aline hole in mount (10) with hole in
link (l). Install pin (9) and two new
cotter pins (8).
b. Aline link (1) with hole in bracket (11).
NOTE
If link (1) does not aline with bracket (11), go to step
2.
c. Install pin (7) and lockpin (6).
Go on to Sheet 7
5-18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals