 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
FORWARD ENGINE MODULE REPLACEMENT (Sheet 5 of 10)
WARNING
REMOVE MODULE (1) FROM STAND (2).
a. Raise hoist hook (3) until cables (4) are
slack.
b. Remove module sling (5) from chain
(6). Hook sling (5) to hoist hook (3).
c. Hold module (1) steady when being
moved.
d. Move module (1) away from stand (2) and
set on six wood block: (7).
REMOVE GASKET (8) FROM REAR
MODULE (9).
NOTE
If module (1) was removed for access only, go to
installation step 1.
9. REMOVE SLINGS (5, 10) FROM
MODULE (l).
a. Lower hoist hook (3) until transfer sling
(10) is slack.
b. Remove pin (11). Remove shackle (12)
from block (13). Install pin (11) in
shackle (12).
c. Remove sling hook (14) from pin (15).
10. REMOVE ELBOW (16), TUBE TEE (17),
AND SEAL (18).
11. INSPECT PARTS FOR DAMAGE. REPLACE
AS REQUIRED.
12. REMOVE NEW ENGINE FROM SHIPPING
CONTAINER (PAGE 4-6).
Go on to Sheet 6
5-17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals