REMOVE FORWARD MODULE

TM 9-2835-255-34

FORWARD ENGINE MODULE REPLACEMENT (Sheet 3 of 10)

CAUTION

Do not lean on, or hang anything on shaft (l).

Damage to bearing seal or air seal may result.

5. REMOVE FORWARD MODULE (2) FROM

REAR MODULE (3) AND CLEAN FOUR

JACKSCREW HOLES (4).

a. Remove 81 bolts (5) and self-locking

nuts (6).

b. Remove 15 self-locking nuta (7) from

studs (8).

c. Apply oil to tap and clean out holes (4

located at 12, 3, 6, and 9 o'clock

positions.

d. Apply oil to four jackscrews (9). Install

jackcrews (9) in holes (4).

NOTE

Tighten jackscrews (9) evenly opposite each other.

e. Install jackscrews (9) evenly until forward

module (2) moves away from rear module

(3). Remove jackscrews (9).

NOTE

Make sure module flanges (10) are alined before

moving.

f. Turn handle (11) counterclockwise until

forward dolly (12) stops at end of

stand (13).

Go on to Sheet 4

5-15