 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
TURBINE AXIAL COMPRESSOR (HIGH PRESSURE) HOUSING (TOP HALF)
REPLACEMENT (Sheet 4 of 5)
CAUTION
When working on internal parts of engine, make
sure dirt or any objects do not get in engine.
NOTE
If any vanes (1) came loose during removal of
housing (2), do step 2.
2. APPLY A SMALL AMOUNT OF BEESWAX
ON CROWN (3) OF VANE (1) TO HOLD IN
PLACE.
3. ALINE HOLE IN VANE END (4) WITH
PIN (5) AND INSTALL VANE ASSEMBLY
(1) IN HOUSING (2).
CAUTION
Be careful not to damage seal (6) when installing
housing (2). If seal (6) is damaged, repeat removal
step 3 and installation step 1 to replace seal (6).
4. INSTALL HOUSING (2).
a. Position housing (2) on engine (7).
b. Apply antiseize compound to 14 bolts (8).
Install bolts (8) and new nuts (9).
c. Apply antiseize compound to 16 bolts (lo).
Install bolts (10) and new
lockwashers (11).
d. Apply antiseize compound to 14 bolts (12).
Install bolts (12) and new nuts (13).
Go on to Sheet 5
5-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals