 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2815-224-34&P
Fan Clutch Maintenance Instructions (Cont)
18-2. FAN CLUTCH REPAIR (CONT).
(94) Release air pressure and remove two 1/2-13
x 2 in. (51 mm) screws.
(95) Loosen eight screws (49),
(96) Add shims (53), as needed, to leave 0.001 to
0.003-in. (0.025 to 0.076 mm) gap.
(97) Tighten eight screws (49) evenly to 20 lb-ft
(27.12 Nm).
(98) Install two 1/2- 13 x 2 in. (51 mm) screws
through fan hub (27) and finger-tighten
screws against bearing retainer (31).
(99) Apply adhesive-sealant to expansion plug (56).
CAUTION
Insure screws from fan drive overhaul tool kit are installed while installing
expansion plug to prevent damage to bearings.
(100) Install expansion plug (56), numbered side down, in fan hub (27) using tool No. 1.
(101) Remove two 1/2-13 x 2 in. (51 mm) screws from fan hub (27).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals