 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Fan Clutch Maintenance Instructions (Cont)
18-2. FAN CLUTCH REPAIR (CONT).
(2) Install tool No. 2 on tool No. 5.
(3) Support fan pulley (5) with tool No. 2 and tool No. 5.
(4) Apply lubricating oil to oil seal (6) and tool No. 4.
CAUTION
All tools should be centered and oil seal properly alined with
fan pulley to prevent improper installation or damage to oil seal
during installation.
(5) Press oil seal (6) flat side up. into fan pulley (5) until tool
No. 4 contacts tool No. 2.
(6) Support fan pulley (5) with
suitable blocking.
(7) Apply lubricating oil to
bearing race (7).
(8) Press bearing race (7), thin
edge up, into fan pulley (5)
using tool No. 2 until tool
No. 2 contacts fan pulley.
(9) Apply lubricating oil to
bearing (8).
(10) Install bearing (8), numbered
side up, in bearing race (7).
(11) Attach tool No. 5 to fan
pulley (5) using 3/8-16 x 2 in.
(51 mm) screws from fan drive
overhaul tool kit. Finger
tighten screws.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals