GOVERNOR HOUSING ASSEMBLY REMOVAL/INSTALLATION-continued

TM 9-2815-224-34&P

Engine Governor Maintenance Instructions (Cont)

15-2. GOVERNOR HOUSING ASSEMBLY REMOVAL/INSTALLATION (CONT).

(1) Remove screw (1), copper washer (2), and bracket (3) .

(2) Remove screw (4) and copper washer (5).

(3) Remove eight screws (6), lockwashers (7), and washers (8).

(4) Remove governor (9) and gasket (10) from blower (11).

b. Installation.

Apply grease to face of blower (11) and governor (9) and install gasket (10) and governor.

(1)

Install screw (4) with copper washer (5).

(2)

Install screw (1),copper washer (2) and bracket (3).

(3)

Install eight screws (6), lockwashers (7), and washer (8).

(4)

(5) Tighten ten screws (4,1,and 6) to 15 lb-ft 934 Nm).

c. Follow-on Maintenance. Install blower (para 14-3).

END OF TASK

15-2