 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Oil System Maintenance Instructions (Cont)
(14) Install two screws (14),
lockwashers (15), and
washers (16).
(15) Install two screws (17) and
lockwashers (18) to oil pan (3)
and flywheel housing (19).
(16) Tighten 28 screws (14),
starting at center of oil
pan (3), to 15 lb-ft
(21.69 Nm).
(17) Tighten two screws (17) 30 to
35 lb-ft (41 to 47 Nm).
(18) Connect oil return line (20) to
elbow (21) on oil pan (3).
c. Follow-on Maintenance.
(1) Install oil pan drain plug and refill engine oil system (LO 9-2320-279-12).
(2) Install propeller shaft (TM 9-2320-279-20).
(3) Install splash guard (TM 9-2320-279-20).
(4) Connect batteries (TM 9-2320-279-20).
(5) Install engine side panel (TM 9-2320-279-10).
(6) Start and run engine for a short time. Inspect for oil leaks.
(7) Stop engine. After 20 minutes, check oil level. Add oil if necessary.
END OF TASK
8-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals