Installation-continued - TM-9-2815-224-34-P0226

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-12. FRONT BALANCE COVER AND VIBRATION DAMPER REMOVAL/INSTALLATION

(CONT).

(2) Coat gasket (4) with grease and

install on front cover (2).

(3) Aline studs (5) on front balance

cover (2) with holes in end

plate (6).

(4) Install front balance cover (2) on

end plate (6).

(5) Install three screws (7), washers (8), lockwashers (9),

and nuts (10). Tighten nuts to 30 to 35 lb-ft (40 to

47 Nm).

(6) Install screw (11), washer (12), Iockwasher (13),

and nut (14) in front balance cover (2).

Tighten screw to 35 to 40 lb-ft (47 to 54 Nm).

(7) Install screw (15), Iockwasher (16),

washer (17), and nut (18). Tighten screw to

35 to 40 lb-ft (47 to 54 Nm).

7-48