Installation-continued - TM-9-2815-224-34-P0162

TM 9-2815-224-34&P

Flexplate and Flywheel Housing Maintenance Instructions (Cont)

5-3.

FLYWHEEL HOUSING AND REAR OIL SEAL REMOVAL/INSTALLATION (CONT).

Tighten twenty-eighth screw on flywheel

(35)

housing (1) to 30 to 35 lb-ft (41 to 47 Nm).

Tighten twenty-ninth and thirtieth screws to

(36)

137 to 147 lb-ft (186 to 200 Nm).

Apply grease to gasket (50).

(37)

Install screw (51), copper washer (52), access cover (53), and gasket (50)

(38)

Install five screws (54) and lockwashers (55).

(39)

Tighten screws (51 and 54) to 25 to 30 lb-ft (34 to 41 Nm).

(40)

Tighten four screws (21 and 27) to 25 to 30 lb-ft (34 to 41 Nm).

(41)

5-18 Change 2