Assembly-continued - TM-9-2815-224-34-P0099

TM 9-2815-224-34&P

Cylinder Head Maintenance Instructions (Cont)

WARNING

Adhesives, solvents, and sealing compound can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

Coat threads of plugs with pipe thread sealing compound before installation.

Fuel adapters have changed to a preformed packing style adapter instead of a flared

style adapter. Replace all old style flared adapters with new style preformed packing

adapters. Refer to TM 9-2320-279-24P.

RIGHT FRONT BANK

Install eight washers (1) and fuel adapters (2) into cylinder head (3). Tighten adapters to 40 to

(1)

45 lb-ft (102 to 115 Nm).

Install two plugs (4), plug (5), and plug (6) flush with end of cylinder head (3).

(2)

Install elbow (7), elbow (8), tee (9), and connector (10).

(3)

(4)

Install three plugs (11), plug (12), and plug (13).

(5)

Install two elbows (14).

3-51

Change 2