Follow-on Maintenance. - TM-9-2815-224-34-P0091

TM 9-2815-224-34&P

Cylinder Head Maintenance Instructions

(16) Install engine

lifting

bracket (29).

NOTE

Left and right banks are

different. Left bank has

three screws. Right bank

has only two screws.

Bracket shown being

installed on left bank.

Install two

(17)

screws (30),

lockwashers (31),

and hose

clamp (32).

Tighten screws to

20 to 25 lb-ft (27 to

34 Nm).

NOTE

Some engines have a fuel modulator air supply hose on the left bank. For engines

with fuel modulator air supply hose, perform steps(17.1) and (17.2). For engines

without fuel modulator or for right bank, perform step (18).

Connect hose (32.1) to elbow (32.2).

(17.1)

Install hose (32.1), clamp (32.3), bracket (33), lockwasher (35), and screw (34).

(17.2)

Install bracket (33), screw (34), and lockwasher (35).

(18)

Install two screws (36), lockwashers (37), and washers (38). Tighten screws to 20 25 lbs-ft (27

(19)

to 34 Nm).

Follow-on Maintenance.

Install injector control tube (para 12-5).

(1)

Install exhaust manifold (para 9-2).

(2)

Install governor cover (para 15-4).

(3)

Install rocker cover (TM 9-2320-279-20).

(4)

Install thermostat housing (TM 9-2320-279-20).

(5)

Install thermostat hoses (TM 9-2320-279-20).

(6)

Install air cleaner air hoses (TM 9-2320-279-20).

(7)

Install muffler exhaust pipe (TM 9-2320-279-20).

(8)

Stow spare tire (TM 9-2320-279-10).

(9)

Fill engine cooling system (TM 9-2320-279-20).

(10)

Connect batteries (TM 9-2320-279-20).

(11)

Close engine cover (TM 9-2320-279-10).

(12)

END OF TASK

3-43

Change 2