ASSEMBLY - TM-9-2815-221-34-P0159

CONNECTING ROD AND PISTON ASSEMBLY REPAIR (CONTINUED)

sleeve bearings (l).

B Press bearings (1) flush with sides of rod (2).

Install piston rings (3) on piston (4).

NOTE

Make sure no ring gap is in line with piston pin.

D Stagger ring gaps one-fourth of the way around

Apply light film of oil (item 16, Appx C) to rings (3) and

Install piston (4) on connecting

G Apply light film of oil (item 16, Appx C) to piston pin (5).

H Install piston pin (5) and

Install connecting rod bearing halves (7) in connecting rod

ASSEMBLY

(2) and rod cap (8).

NOTE

Loosely secure rod cap (8) and bearing halves (7) on connect-

ing rod (2) with bolts (9).

Allow

to O.

groove

between sleeve bearings.

1229