 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 3-94
FILTER ADAPTER REPAIR ICONTINUED)
-.-. --. ---- -- -------- ---- ----- --- , _ _ . - . - - - _ ,
ASSEMBLY
A Install new
and
in adapter
assembly (3).
INSTALLATION
B
Place new gasket (4) and cover (5) over thermostat (1) and
A
Install new gasket (1) and oil filter adapter (2) on cylinder
spring (2).
block with three bolts (3) and
(4).
C Secure
and cover (5) with three screws (6) and
B Tighten bolts
evenly to 18-20
(7).
c
Apply single layer of sealant tape (item 20, Appx C), to
D
Install elbows (8, 9 and 10).
threaded end of oil coder Line elbows (5).
E Tighten elbow (8) to position of about 20 degrees left of top
center.
After tightening, elbows should be parallel to
Tighten elbow
to position of about 90 degrees left of top
F
crankshaft.
center.
D Install and tighten two elbows (5).
G Install straight
on elbow (8).
1202
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals