 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 3-24
GLOW PLUG, NOZZLE AND HOLDER ASSEMBLY REPAIR (CONTINUEI
CLEANING
WARNING
Dry-cleaning solvent used to clean parts is poten-
tially dangerous to personnel and property. Do
not use near open flame or excessive heat. Flash
of solvent is 1380 F.
CAUTION
Never use hard or sharp tools, grinding powder
or abrasives of any kind to clean nozzles.
NOTE
When cleaning nozzles, work in clean room and
on clean work bench. Use clean diesel fuel,
cleaning solvent (item 8, Appx C) or mineral
spirits paint thinner (item 21, Appx C). Dry all
parts using clean lint-free cloth (item 6, Appx C)
or clean, filtered, compressed air.
Remove adjusting nut cover (10).
I
A
Soak nozzle and holder assembly in diesel fuel to loosen dirt.
B
Clean outer surface of nozzle and holder assembly with
brass brush.
For reassembly: Note number of exposed threads
c
on adjusting nut (11) or measure height of ad-
Clean hole in nozzle with wood splinter.
justing nut
from body (1).
D
Remove heavy carbon deposits with carbon-removing sol-
Remove adjusting nut (11) and washer (12).
J
vent (item 7, Appx C).
K Remove spring (13) and spindle (14).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals