Special Information - TM-9-2815-213-340107

C 1, TM 9-2815-213-34

listed in SB 708-42 which is used to identify the

Publication and short title

manufacturer, distributor, or Government agency, etc.

LO 9-2320-206-12, Truck, Tractor, 10-Ton, 6x6

f. Description. Indicates the Federal item name and,

TM 9-2320-206-ESC, Truck, Tractor, 10-Ton, 6x6

if required, a minimum description to identify the item.

TM 9-2320-206-20, Truck, Tractor, 10-Ton, 6x6

Items that are included in kits and sets are listed below

TM 9-2320-206-20P, Truck, Tractor, 10-Ton, 6x6

the name of the kit or set with the quantity of each item in

B-5. How To Locate Repair Parts

the kit or set indicated in the quantity incorporated in unit

a. When National Stock Number or Part Number is

column. When the part to be used differs between serial

Unknown:

numbers of the same model,

the effective serial

(1) First. Using the table of contents, determine

numbers are shown as the last line of the description. In

the functional subgroup within which the repair part

the Special Tools List, the initial basis of issue (BOI)

belongs.

This is necessary since illustrations are

appears as the last line in the entry for each special tool,

prepared for functional subgroups and listings are

TMDE, and support equipment. When density of

divided into the same groups.

equipments supported exceeds density spread indicated

(2) Second. Find the illustration covering the

in the basis of issue, the total authorization is increase

functional subgroups to which the repair part belongs.

accordingly.

(3) Third.

Identify the repair part on the

g. Unit of Measure (U/M). Indicates the standard of

illustration and note the illustration figure and item

the basic quantity of the listed item as used in performing

number of the repair part.

the actual maintenance function. This measure is

(4) Fourth. Using the Repair Parts Listing, find

expressed by a two character alphabetical abbreviation

the figure and item number noted on the illustration.

(e.g., ea., in pr, etc.). When the unit of measure differs

b. When National Stock Number or Part Number is

from the unit of issue, the lowest unit of issue that will

Known.

satisfy the required units of measure will be

(1) First. Using the Index of National Stock

requisitioned.

Numbers and Part Numbers, find the pertinent National

h. Quantity Incorporated in Unit. Indicate the

stock number or part number. This index is in ascending

quantity of the item used in the breakout shown on the

NSN sequence followed by a list of part numbers in

illustration figure, which prepared for a functional group,

ascending alphameric sequence, cross-referenced to

subfunctions group, or an assembly. A "V" appearing in

the illustration figure number and item number.

this column in lieu of a quantity indicates that no specific

(2) Second. After finding the figure and item

quantity is applicable, (e.g., shims spacers, etc.).

number, locate the figure and item number in the repair

B-4. Special Information

parts list.

a. Repair parts kits and gasket sets appear a the

B-6. Reporting of Errors.

last entries in the repair parts listing for the figure in

You can improve this manual by recommending

which its parts are listed as repair parts

improvements using DA Form 2028 (Recommended

The following publications pertain to the

Changes to Publications and Blank Forms) and mailing

M123A1C and M123E2 10-ton trucks which us the V8-

the form direct to Commander,

US Army Tank-

300 diesel engine:

Automotive Command, ATTN: AMSTA-MTP, Warren,

MI 48090. A reply will be furnished direct to you.

B-3