Click here to make tpub.com your Home Page

Page Title: FIGURE 463. ADJUSTING RELEASE LEVER HEIGHT
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

clutch cover assembly and spacer plate
(3) Figure 463. (A) Set depth micrometer
on flywheel with eight 3/8-inch lock
to 1.625-inch and check distance be-
washers and 3/8 x 15/16 cap screws.
tween crown of release lever and sur-
face of clutch spacer plate (fig. 464).
Note. The nominal height setting for the four
(B) Turn release lever adjusting nut as
release levers is 1-5/8 -inch from the crown of
necessary using face spanner wrench
the release levers to the surface of the clutch
socket- 8390124, until crown of release
spacer plate. The spacer plate is 0.380-inch
lever contacts depth micrometer with
thick. See figure 34 for details. Total distance
micrometer  anvil contacting clutch
from release lever crown to face of flywheel is
spacer plate. (C) Adjust remaining three
2.00 -inch with spacer plate removed.
release levers in the same manner.
FIGURE 462. INSTALLING CLUTCH COVER
ASSEMBLY AND SPACER PLATE IN
FLYWHEEL.
FIGURE 464. CLUTCH COVER BALANCING
FIGURE 463. ADJUSTING RELEASE LEVER
INSTRUCTIONS AND RELEASE LEVER
HEIGHT.
ADJUSTMENT HEIGHT DIMENSIONS.
294

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business