 |
|||
|
|
|||
|
Page Title:
FIGURE 246. REMOVING OR INSTALLING FLAME HEATER IGNITION UNIT. |
|
||
| ||||||||||
|
|
 (1) Figure 245. (A) Disconnect flame heater
fuel solenoid valve-to-flame heater
nozzle tube from 1/8 pipe x 1/4 tube,
90 degree elbow in flame heater nozzle
and holder assembly. (B) Disconnect
flame heater fuel return-to-solenoid
valve tube from 1/8 pipe x 1/4 tube
connector in flame heater nozzle and
holder assembly. (C) Disconnect flame
heater ignition lead from spark plug and
ignition unit. Remove ignition lead.
(D) Remove four 5/16-inch plain nuts
and 5/16-inch lock washers securing
intake manifold flame heater assembly
to intake manifold elbow. Remove flame
heater harness clamp. (E) Remove the
flame heater assembly.
FLAME HEATER IGNITION UNIT.
INTAKE MANIFOLD FLAME HEATER
ASSEMBLY
(2) Figure 246. (A) Remove and discard
flame heater gasket. (B) Disconnect
f l a m e heater harness from ignition
unit. (C) Remove two 5/16-inch plain
nuts and 5/16-inch lock washers se-
curing two clamps which hold ignition
unit to intake manifold elbow. (D) Re-
move ignition unit and clamps. Remove
clamps from ignition unit.
INTAKE MANIFOLD ELBOW.
158
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals