 |
|||
|
|
|||
|
Page Title:
REMOVAL OF ENGINE ACCESSORIES DURING ENGINE DISASSEMBLY |
|
||
| ||||||||||
|
|
 115. REMOVAL OF ENGINE ACCESSORIES
-10912239 on flywheel housing studs and secure
DURING ENGINE DISASSEMBLY
brackets with eight 1/2-inch plain nuts and 1/2-
inch lock washers. Install right and left front
mounting brackets -10899191 and 10899173 on
Remove engine accessories from engine
the left and right sides of engine front plate
after installing the engine on overhaul stand.
and secure with four 7/16 x 1-3/8 cap screws
The accessories will then be sent to qualified
and 7/16-inch plain nuts.
personnel for rebuild.
b. Install Engine Assembly on Overhaul
Stand. Lower the engine assembly on the engine
N o t e . To prevent entry of dirt, cover all
overhaul stand. Aline the engine mounting
fuel and oil line connectictions and all air and
bracket holes with the slotted openings in the
exhaust openings on accessories and engine
cradle side rails. Secure engine cradle side
after removal.
rails using four 5/8 x 1-3/4 cap screws and
5/8-inch plain nuts through each engine mount-
a. Starter Assembly. Remove starter as-
ing bracket as shown in figure 224.
sembly following instructions for figure 39.
STAND - 3/4 LEFT FRONT VIEW.
150
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals