Table 6-38. Engine Oil Cooler Standard and Oversize Stud Identification

paragraph 6-4e and table 6-38 when replacing

Replace

screens

that

are

unserviceable.

studs.

Straighten bent screens to as near original shape

Note. Do

not

repair

leaks

as possible.

Soldering is not an acceptable repair because of

e. Repair. Refer to paragraph 6-4. Refer to TB

high operating temperature and pressure.

9-228

for

repair

oil

coolers.

Refer

Table 6-38. Engine Oil Cooler Standard and Oversize Stud Identification

Fig.

Stud size

Ref.

Setting

No.

and length

height

req'd

5 / 16-18 (11 / 16) x 5 /16-24(11 / 16) x 2-7 / 16 (STD)

(0.003 in. OS)

(0.007 in OS)

(0.012 in. OS)

Note. Refer to figure 6-1 for oversize stud

identification.

f. Assembly. Refer to figures 6-223 through 6-

221.

6-189