Figure 6-198. Installing advance flyweight adjusting ring and injection pump drive gearshaft attaching parts (adjusting ring secured with bolts).

and drive gearshaft flange. Install two slotted

1. Install six bolts (A) through gearshaft flange,

flyweight

flyweight housing, advance vane housing, and secure in

nuts (B),

flat washers, and cotter pins on flyweight pine

adjusting ring.

vane housing cover. Install locking wire securing bolts.

securing

2. Move the adjusting ring to aline scribe marks on ring,

3. Install

intermediate bearing support (C).

Figure 6-198. Installing advance flyweight adjusting ring and injection pump

drive gearshaft attaching parts (adjusting ring secured with bolts).

6-164