Figure 6-171. Removing fuel injection pump spur gearshaft ball bearing.

Remove

1. Straighten tab on retaining washer (A) and remove

gearshaft plug and washer.

2. Remove oil transfer plug (B) from camshaft drive

gearshaft.

Install

1. Position fuel injection pump spur gearshaft (A) in

1. Position oil transfer plug (B) in camshaft drive

arbor press.

gearshaft.

2. Press gearshaft from spur gearshaft ball bearing (B)

2. Install gearshaft plug and retaining washer (A) torque

using press plate to support bearing.

to 1000-1200 lb. in. and bend tab on washer securing

plug.

Figure 6-171. Removing fuel injection pump

spur gearshaft ball bearing.

Figure 6-172. Removing or installing oil

transfer plug from camshaft drive gearshafts.

6-144