Figure 6-167. Separating or attaching rear fan and accessory drive housing (housings equipped with oil restrictors).

h o u s i n g s . If restrictors are installed in housings

Separate

n o t requiring them, or conversely, serious clutch

1. Remove seven self-locking nuts (A) and flat washers.

damage will result.

2. Separate rear fan drive housing and accessory drive

housing.

Attach

3. Remove two pipe plugs (B), one from accessory drive

1. Install oil restrictor (D) in horizontal oil passage in

housing and one from fan drive housing.

fan drive housing.

4. Remove oil restrictor (C) from vertical oil passage in

2. Install oil restrictor (C) in vertical oil passage in fan

fan drive housing.

drive housing.

5. Remove oil restrictor (D) from horizontal oil passage

3. Install two pipe plugs (B), one in fan drive housing

in fan drive housing.

and one in accessory drive housing.

Note. The installation of oil restrictors in

4. Position accessory drive housing on fan drive housing.

specified engines i s c r i t i c a l . B e c e r t a i n t h e

5. Install seven self-locking nuts (A) and flat washers.

restrictors

are kept with their respective

Figure 6-167. Separating or attaching rear fan and accessory drive

housing (housings equipped with oil restrictors).

6-142