Figure 6-146. Separating or positioning vertical drive shaft, top clutch disc, and housing assembly (piston actuated clutch).

Remove

t h e need for replacement. Use an arbor press to

1. Separate vertical drive shaft (A) from housing

remove dowel pins from housing.

assembly.

2. Separate top clutch disc (B) from housing.

Install

Note. Do not remove the two dowel pins from

1. Position top clutch diae (B) in housing assembly.

housing unless inspection (para 6-40c) indicates

2. Position vertical drive shaft (A) in housing.

Figure 6-146. Separating or positioning vertical drive shaft, top clutch

disc, and housing assembly (piston actuated clutch).

6-124