Figure 6-111. Removing or installing auxiliary oil filter element.

Remove

1. Remove bushing (A), spring, and retainer from

support.

2. Remove and discard oil filter element (B).

Disconnect

Note. Do not remove support or handle from

1. Position auxiliary oil filter in arbor press and

com-

filter cover unless inspection (para 6-38c)

press retainer as shown using suitable blocks (A).

indicates replacement is necessary.

2. Remove cotter pin (B) and remove filter from

arbor

Install

press.

1. Position a new auxiliary oil filter element (B) on

Connect

cover.

1. Position auxiliary oil filter in arbor press and

com-

2. Position retainer, spring, and bushing (A) on support.

press retainer as shown using suitable blocks (A).

2. Install cotter pin (B) and remove filter from

arbor

Figure 6-111. Removing or installing

press.

auxiliary oil filter element.

Figure 6-110. Disconnecting or connecting

b. Cleaning. Refer to paragraph 6-2. Make

auxiliary oil filter element retainer

c e r t a i n all oil passages (fig. 6-112) are clear and

and bushing.

not obstructed.

6-104