Figure 6-92. Removing or installing pressure <a href="http://navyaviation.tpub.com/14115/Oil-Pump-252.html">oil pump</a> elbow adapter and oil pickup screen assembly attaching parts (universal vehicle application engines).

Remove

N o t e . Do not tighten nuts (C) or install

1. Remove six bolts (A) and lock washers.

locking wire until oil pan is in position on engine.

2. Remove two pipe plugs (B).

T h i s allows adapter to aline with oil spill tube.

3. Cut locking wire and remove four slotted nuts (C).

2. Install two pipe plugs (B).

Install

3. Install six bolts (A) and lock washers.

1. Install four slotted nuts (C).

Figure 6-92. Removing or installing pressure oil pump elbow adapter

and oil pickup screen assembly attaching parts (universal

vehicle application engines).

6-93