Figure 6-49. Removing or installing valve springs, upper retainers, and exhaust valve rotor

4. Place cylinder on side and remove the intake and

1. Remove exhaust valve inner, intermediate, and outer

exhaust valves (D) through the cylinder bore.

valve springs, upper retainer and exhaust valve rotor

(A) from valve stem.

Note. Temporarily install valve rocker arm

2. Remove intake valve springs (B), retainer, and seat in

covers on cylinders with two bolts to prevent

the same manner.

3. Hold the valve stems in position in the cylinder head

d a m a g e arid mismating of parts. Refer to figure

and remove the cylinder from removing and inserting

5-105 for cover and cylinder identification.

valve stand - 4910-554-1317 (C).

Figure 6-49. Removing or installing valve springs, upper retainers,

and exhaust valve rotor.

6-53