Table 6-7. Generator and Starter Idler Gears Overhaul Standards

Table 6-7. Generator and Starter Idler Gears Overhaul Standards

Note. Refer

6-3b

for

explanation

symbols.

c. Assembly. Assemble generator idler gear

following instructions which accompany figure

6-29. The starter idler gear is similar and may be

assembled in the same manner.

1. Coat ball bearing (A) with engine oil Military

Specification MIL-L-45199, and position bearing in

bearing bore of generator idler gear.

2. Carefully press bearing into gear untill bearing seats

against flange in gear. Secure bearing in gear with

retaining ring (A) as shown in figure 6-28.

6-29.

Pressing

ball

bearing

into

generator

idler

gear.

6-32