Figure 6-8. Removing or installing crankcase from engine overhaul stand using improvised rope sling.

Install

Remove

1. Remove

four bolts (A) and flat washers attaching

1. Attach a rope sling (B) as shown, with weight equally

crankcase

to engine overhaul stand.

balanced, and position crankcase on engine overhaul

stand.

2. Attach a

rope sling (B) as shown, with weight equally

balanced,

and remove crankcase from stand.

2. Install four bolts (A) and flat washers securing crank-

case to stand.

Figure 6-8. Removing or installing crankcase from engine overhaul

stand using improvised rope sling.

Thoroughly clean crankcase oil passages (fig. 6-

Cleaning.

9) using compressed air and brass wire probes.

(1) Refer to paragraph 6-2b for general

instructions

on cleaning

the crankcase.

6-14