Figure 5-135. Removing or installing oil pan rear bolts.

Remove

Install

1. Cut locking wire (A) securing eight bolts.

1. Install eight bolts (B) and flat washers securing oil

2. Remove eight bolts (B) and flat washers attaching oil

pan to rear of crankcase assembly.

2. Install locking wire (A) securing bolts.

Figure 5-135. Removing or installing oil pan rear bolts.

2. Remove 27 of the 28 self-locking nuts (B) and flat

Remove

washers attaching oil pan to each side of crankcase

1. Cut locking wire and remove 12 drilled head bolts (A)

assembly.

and flat washers attaching oil pan to crankshaft damper

install

and oil filter housing.

1. Install 27 self-locking nuts (B) and flat washers

securing oil pan to each side of crankcase assembly.

Note. One self-locking nut (B) and flat washer

2. Install 12 drilled head bolts (A) and flat washers

must remain on each side of oil pan until oil pan

securing oil pan to crankshaft damper and oil filter

i s removed to prevent oil pan from falling and

housing. Install locking wire securing bolts.

being

damaged.

Figure 5-136. Removing or installing oil pan bolts-right front view.

5-75