Figure 5-90. Removing or installing turbo supercharger oil inlet hose and fire extinguisher tube-engines with new tube and relocated clamps.

Remove

Install

1. Remove self-locking nut (A) attaching two cushioned

1. Install two cushioned loop clamps on fire extinguisher

loop clamps securing oil inlet hose and fire extinguisher

tube (E) and position tube in engine.

tube to front fan drive housing.

2. Position turbosupercharger oil inlet hose (D) in engine

2. Remove self-locking nut (B) attaching two cushioned

and connect to elbow in crankshaft damper and oil filter

loop clamps securing oil inlet hose and fire extinguisher

housing.

tube to rear fan drive housing.

3. Position turbosupercharger oil inlet hose and fire

3. Remove self-locking nut and machine screw (C)

extinguisher tube clamps as shown. Install self-locking

attaching turbosupercharger oil inlet hose and fire

nut and machine screw (C) securing clamps.

extinguisher tube clamps. Remove clamps.

4. Position two cushioned loop clamps on fire ex-

4. Disconnect and remove turbosupercharger oil inlet

tinguisher tube as shown and aline with clamp on oil

hose (D) from elbow in crankshaft damper and oil filter

inlet hose. Install self-locking nut (B) securing clamp to

housing.

rear fan drive housing.

5. Remove fire extinguisher tube (E) and clamps.

5. Install self-locking nut (A) securing clamps to front

Remove two clamps from tube.

fan drive housing.

Figure 5-90. Removing or installing turbo supercharger oil inlet hose and

fire extinguisher tube-engines with new tube and relocated clamps.

5-55