Figure 5-55. Removing or installing oil filler and <a href="http://armyordnance.tpub.com/Od16198/Od161980078.htm">oil level indicator</a> tubes- engines with splash pan installation.

Remove

Note. The oil filler and oil level indicator tubes

m u s t be removed before cylinder head plates

between cylinders Nos. 1 L , 2L and 3L can be

removed.

1. Remove two hex head screws (A) and lock washers

and remove oil filler tube plate.

2. Remove two hex head screws (B) and lock washers

and remove oil level indicator tube plate.

3. Remove and discard grommet (C).

Remove

Install

1. Remove three assembled washer bolts (A) and seal

1. Install a new grommet (C) in oil level indicator tube

washers and remove oil filler tube. Discard seal

plate.

washers.

2. Position indicator tube plate and install two hex head

2. Remove and discard oil filler tube gasket (B).

screws (B) and lock washers securing plate.

3. Remove pan head screw (C) and self-locking nut and

3. Position oil filler tube plate and install two hex head

remove two hose clamps from oil level indicator tube.

screws (A) and lock washers securing plate.

4. Remove three self-locking nuts (D) and remove oil

level indicator tube.

Figure 5-55. Removing or installing oil filler

5. Remove and discard oil level indicator tube gasket

and oil level indicator tubes- engines with

(E).

splash pan installation.

Install

1. Install a new oil level indicator tube gasket (E) on oil

pan.

2. Position oil level indicator tube on oil pan. Install

three self-locking nuts (D) securing tube.

3. Position two hose clamps, one on indicator tube, and

install pan head screw (C) and self-locking nut securing

clamps.

4. Install a new oil filler tube gasket (B) on oil pan.

5. Position oil filler tube on oil pan. Install three

assembled washer bolts (A) and new seal washers

securing tube.

Figure 5-56. Removing or installing oil filler

and oil level indicator tube plates -

engines with splash pan installation.

5-30