Figure 5-41. Removing or installing fuel/ water separator filter mounting bracket.

Remove

1. Remove three hex head screws (A), flat washers, and

lock washers attaching fuel / water separator filter

mounting bracket to cylinder No. 1L and remove

bracket.

Remove

2. Remove and discard mounting bracket gasket (B).

1. Remove three cap screws (A) and lock washers at-

Install

taching secondary fuel filter mounting bracket and

1. Install a new mounting bracket gasket (B).

camshaft cover plate to cylinder No. 1L. Remove

2. Position fuel/ water separator filter mounting bracket

bracket and cover plate. Remove and discard cover

on cylinder No. 1L. Install three hex head screws (A),

plate gasket.

flat washers, and lock washer-a securing bracket to

2. Remove four self-locking nuts (B) and flat washers

cylinder.

attaching tachometer drive cover and remove cover.

3. Remove and discard tachometer drive cover gasket

Figure 5-41. Removing or installing

(c),

fuel/ water separator filter

Install

mounting bracket.

1. Install a new tachometer drive cover gasket (C).

2. Position tachometer drive cover and install four self-

locking nuts (B) and flat washers securing cover.

3. Install new camshaft cover plate gasket. Position

camshaft cover plate and secondary fuel filter mounting

bracket to cylinder No. 1 L and install three cap screws

(A) securing plate and bracket to cylinder.

Figure 5-40. Removing or installing

secondary fuel filter mounting bracket,

camshaft cover plate, and tachometer

drive cover.

5-22