Figure 5-27. Removing or installing manifold heater fuel return solenoid valve and bracket

Remove

1. Disconnect manifold heater fuel inlet tubes (A) from

tee in manifold heater fuel solenoid valve. Remove both

fuel inlet tubes.

Remove

1. Disconnect manifold heater fuel return tube (A) from

2. Remove tube tee and elbow (B).

elbow in heater fuel return solenoid valve and from

3. Remove two assembled washer bolts (C J attaching

solenoid valve to mounting bracket and two assembled

elbow in tube cross. Remove fuel return tube ( B ) and

grommet.

washer bolts (D) and flat washers attaching solenoid

2. Remove elbows (C) and tube tee from solenoid valve.

mounting bracket to filter mounting bracket. Remove

solenoid mounting bracket.

3. Remove two assembled washer bolts (D) and remove

valve from mounting bracket.

4. Remove two screws (E), lock washers, and flat

washers attaching manifold heater fuel filter to

4. Remove three self-locking nuts (E) and bolts at-

taching mounting bracket to left center shroud and

mounting bracket. Remove fuel solenoid valve and

remove bracket.

filter as a unit.

Install

5. Separate filter and solenoid valve. Remove connecting

1. Position mounting bracket on left center shroud and

nipple and inlet tube connector.

install three self-locking nuts (E) and bolts securing

Install

bracket to shroud.

1. Install inlet tube connector in manifold heater fuel

2. Position heater fuel return solenoid valve on mounting

filter and install connecting ripple between fuel filter

bracket and install two assembled washer bolts (D)

and manifold heater fuel solenoid valve.

securing valve to bracket.

2. Position fuel filter with solenoid valve on mounting

3. Install elbows (C) and tube tee in solenoid valve.

bracket and install two screws (E), lock washers, and

4. Position manifold heater fuel return tube (B) with

flat washers securing filter to bracket.

grommet and connect tube to elbow (A) in tube cross

3. Position solenoid mounting bracket and install two

and elbow (A) in solenoid valve.

assembled washer bolts (D) and flat washers securing

solenoid bracket to filter mounting bracket. Install two

assembled washer bolts (C) securing solenoid valve to

Figure 5-27. Removing or installing manifold

mounting bracket.

heater fuel return solenoid valve

4. Install elbow and tube tee (B) in solenoid valve.

and bracket.

5. Position both manifold heater fuel inlet tubes (A) and

connect tubes to tee in fuel solenoid valve.

Figure 5-26. Removing or installing manifold

heater fuel inlet solenoid valve and

fuel filter.

5-15