Figure 4-178. Removing or installing oil seal housing cap and housing.

1. Install two mechanical pullers - 5120-473-7222 (A)

into oil seal cap and housing puller screw holes.

2. Pull cap and housing free of dowel pins.

Remove

1. Remove spring (A) from lip in crankshaft oil seal.

Figure 4-177. Removing oil seal housing

2. Remove the split oil seal (B) from crankshaft.

using mechanical pullers--5120-473-7222.

Install

1. Install split oil seal (B) in crankshaft.

2. Install spring (A) in lip in crankshaft seal.

Figure 4-179. Removing or installing

crankshaft oil seal.

Figure 4-178. Removing or installing oil seal

housing cap and housing.

1. Position oil seal spring (A) (male and female) to

facilitate removal.

2. Twist male end clockwise and female end (B)

counterclockwise, and remove crankshaft oil seal

spring.

Figure 4-180. Removing crankshaft oil

seal spring.

4-91