Section II. REMOVAL OR INSTALLATION OF ENGINE ACCESSORIES

Section Il. REMOVAL OR INSTALLATION OF

ENGINE ACCESSORIES

4-3. GeneraI

determined by referring to Table 4-1. This table

lists the illustrations applicable for removing or

This

section covers the replacement of the

installing an Engine Accessory

Reference

accessories. P r o p e r p r o c e d u r e s a n d i n -

engine

figures are listed under the appropriate heading

structions for the removal and installation of any

in the table.

one

the

engine

accessories

can

easily

Table 4-1. Engine Accessories

4-4. Removal or Installation Instructions

Disconnect

1 . Disconnect fuel hose (A) from fuel pump outlet

adapter. Collect fuel in a suitable container and discard.

2. Disconnect fuel pump inlet tube nuts (B).

3 . Remove two screws (C), lock washers, one flat

w a s h e r , and one clip. Pull check valve away from

mounting bracket as necessary, and remove fuel inlet

tube.

Connect

1. Position fuel inlet tube on check valve and fuel pump.

Loosely install two cap screws (C), lock washers, one

f l a t washer, and one clip securing check valve to

mounting bracket.

2. Connect fuel inlet tube nuts (B).

3. Tighten cap screws (C).

4. Connect fuel hose (A) to fuel pump outlet adapter.

Figure 4-1. Disconnecting or connecting fuel

hose at fuel pump outlet adapter and fuel

pump inlet tube at fuel pump.

4-2