SECTION I. INTRODUCTION - TM-9-2805-203-34P0005

SECTION I

INTRODUCTION

1. Scope

Code

Definition

This manual lists repair parts and special tools

Support item, excluding support equipment,

required for the performance of direct support and

procured for initial issue or outfitting, and

stocked only for subsequent or additional initial

g e n e r a l support maintenance of the continental

issues or outfitting. Not subject to automatic

model R-6602 engine.

replenishment.

2. General

Support equipment procured and stocked for

initial issue of outfitting to specified main-

This repair parts and special tools list is divided

tenance repair activities.

into the following sections:

Support equipment which will not be stocked, but

a. Repair Parts List-Section II. A list of repair

which will be centrally procured on demand.

parts authorized at the direct support and general

Item procured and stocked to provide for

sustained support for the life of the equipment.

support levels (including the depot maintenance

It is applied to an item peculiar to the equip-

level) for the performance of maintenance. The list

ment which, because of probable discontinuance

also includes parts which must be removed for the

or shutdown of production facilities, would

replacement of the authorized parts. Parts lists are

prove uneconomical to reproduce at a later time.

composed o f f u n c t i o n a l g r o u p s in ascending

An item of a depot overhaul/ repair kit and not

purchased separately. Depot kit is defined as a

numerical sequence, with parts in each group listed

kit that provides items required at the time of

in figure and item number sequence.

overhaul or repair.

b. Special Tools List-Section III. A list of

An item of a maintenance kit and not purchased

special tools and test equipment authorized for the

separately. Maintenance kit is defined as a kit

performance of maintenance at the direct support

that provides an item that can be replaced at

organizational or intermediate levels of

and general support levels (including the depot

maintenance.

maintenance level).

Item included in both a depot overhaul/ repair

c. F e d e r a l S t o c k N u m b e r a n d R e f e r e n c e

kit and a maintenance kit.

Number Index-Section IV. A list, in ascending

Item to be manufactured or fabricated at

numerical sequence, of all Federal stock numbers

organizational level.

Item to be manufactured or fabricated at the

appearing in the listings, followed by a list, in

direct support maintenance level.

alphameric sequence, o f all reference numbers

Item to be manufactured or fabricated at the

appearing in the listings. Federal stock numbers

general support maintenance level.

and reference numbers are cross-referenced to each

Item to be manufactured or fabricated at the

illustration figure and item number appearance.

depot maintenance level.

Item to be assembled at the organizational level

3. Explanation of Columns

Item to be assembled at the direct support

The following provides an explanation of columns

maintenance level.

Item to be assembled at the general support

found in the tabular listings.

maintenance level.

a. Source, Maintenance and Recoverability

Item to be assembled at the depot maintenance

Codes (SMR). These codes, of the Uniform SMR

level

C o d e format, are listed in Column (1) in five

Item is not procured or stocked. The requirements

positions as follows:

for the item will be filled by replacement of the

next higher assembly or component.

(1) Source Codes. T h e S o u r c e C o d e s a r e

Item is not procured or stocked. If this item is not

entered in the first and second positions and are

available through salvage, it is to be

assigned to support the items for maintenance,

requisitioned.

repair, or overhaul of end items.

Installation drawing diagram, instruction sheet,

Source codes are defined as listed below.

or field service drawing that is identified by a

manufacturer's part number.

Code

Definition

A low-mortality item that is not stocked. When

Item procured and stocked for anticipated or

required requisition the item from the end item

known usage.

manager with e x c e p t i o n data. using the

Item procured and stocked for insurance purpose

manufacturer's code and part number.

because essentiality dictates that a minimum

NOTE

quantity be available in the supply systems.

Cannibalization or salvage may be used as a

Item procured and stocked and which otherwise

source of supply for any items coded above except

would be coded PA except that it is deteriorative

those coded XA and aircraft support items as

in nature.

by AR 700-42.