INSTALL NEW TWO-PIECE RETAINING RING

TM 9-2520270-34

CAUTION

Use care when installing retaining ring. Pieces

may fall Into transmission during installation.

Damage to equipment can occur.

49. INSTALL THREE NEW PREFORMED

PACKINGS (2), (3), AND (4).

48. INSTALL NEW TWO-PIECE

RETAINING RING (1).

a. Coat three new preformed pack-

ings (2), (3), and (4) with trans-

a. Using slip-joint pliers, install

mission oil and install.

retaining ring (1) with sharp edge out.

CAUTION

Do not Install pump withoul fully meshing

mating gears. Damage to equipment can

occur.

50. INSTALL PUMP (5).

a. Position pump (5) in transmission

housing (6). Rotate gear (7) through

sump opening (8) to allow meshing

of teeth with those of spur gear (9).

b. Install four washers (10) and

screws (11).

51. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE FOUR SCREWS (11)

TO 35-40 ft-lb (5-6 mkg).

GO TO NEXT PAGE

4-493