 |
|||
|
|
|||
|
Page Title:
CHECK TENSION ON PRELOAD BEARING HOUSING |
|
||
| ||||||||||
|
|
 TM 9-2520-270-34
12. CHECK TENSION ON PRELOAD BEARING
HOUSING (1).
a. Using spring tester (2), measure spring
force required to rotate housing (1) on
shaft (3).
b.
If force is 1 to 3 lbs (0.45-1.36 kg), go to
step 13. If not, REPAIR CROSS SHAFT
ASSEMBLY, page 4-464.
13. REMOVE LINK (4).
a. Remove and discard cotter pin (5).
b. Remove washer (6), link (4), and
second washer (6).
14. INSPECT LINK (4) AND PIN (7).
a. Inspect link (4) and pin (7) for damage.
See page 2-5.
b. If pin (7) is damaged, go to step 15. If
not, go to step 14c.
c. If link (4) is damaged, replace link and
go to step 17.
15. REPLACE TRANSMISION RECORD
FAILURE ON DA FORM 2407 AND RETURN
REASSEMBLED DEFECTIVE
TRANSMISSION TO DEPOT.
16. EFFORT IS COMPLETE. GO TO END OF
TASK.
4-460
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals