 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
4. REMOVE PISTON ASSEMBLY (1)
FROM ROD (2).
a. Remove retaining ring (3) from
groove (4) in piston assembly (1).
Discard retaining ring.
3. REMOVE PISTON ASSEMBLY (1)
b. Remove and discard piston
WITH BRAKE PISTON ROD (2).
assembly (1).
CHECK ROD (2).
a.
Using micrometer caliper set,
measure diameter of rod (2) in two
places.
b.
Replace rod (2) if either measurement
is less than 0.418 inch (10.62mm).
c.
Replace rod (2) if scored.
5. REMOVE AND DISCARD PACKING
RETAINER (5) AND PREFORMED
REPEAT STEPS 2 THROUGH 6 FOR
PACKING (6).
REMAINING THREE RODS (2).
4-442
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals