 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
28. REMOVE TWO RETAINING RINGS (1),
TWO BEARINGS (2) AND THRUST
WASHER (3).
a. Using screwdriver, remove two
retaining rings (1). Save retaining
29. INSTALL ONE NEW BEARING (2) AND
rings for reassembly.
ONE RETAINING RING (1).
b. Using arbor press and bearing
a. Using arbor press and bearing
installer, press out two bearings (2)
installer, press bearing (2) into
and washer (3). Save washer for
gear (4).
reassembly.
b. Install retaining ring (1).
c. Replace gear (4) if damaged.
c. Turn gear over.
d. Replace bearings (2).
31. INSTALL SPUR GEAR (4) AND
COUPLING (5) IN RIGHT SIDE OF
T R A N S M I S S I O N HOUSING (6).
a. Install coupling (5) in left-hand
30. INSTALL WASHER (3), SECOND
hydraulic assembly (7).
NEW BEARING (2) AND SECOND
b. Aline teeth on spur gear (4) with
RETAINING RING (1).
spline on left-hand hydraulic
a. Place washer (3) in gear (4).
assembly (7). Put in spur gear.
b. Using arbor press and bearing
32 I N S T A L L PREFORMED PACKING (8).
installer, press second bearing (2)
into gear (4).
a. Coat new preformed packing (8) with
transmission oil. Install packing.
c. Install second retaining ring (1)
GO TO NEXT PAGE
4-383
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals