 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
21. CHECK ACTUATOR PISTON ASSEM-
BLY (3) AND ACTUATOR PISTON (4).
a.
Move tang (1) back and forth by
pressing piston (3) into housing (5)
20. INSPECT TANG (1) ON INNER
with finger and releasing.
RACE (2).
b.
If tang (1) moves freely and pis-
a.
Inspect tang (1) for damage.
tons (3) and (4) move smoothly back
See page 2-5.
and forth, go to step 22.
If tang (1) is not damaged, go to
b.
c.
If tang (1) does not return smoothly to
step 21. If tang is damaged, go to
center position with pistons (3) and
step 39.
(4) resting against tang, go to step 39.
23. INSPECT PINTLE ASSEMBLY (7).
a. If pintle assembly (7) and pin (8) are
not damaged and plugs (9) are
installed, go to step 24.
22. INSPECT PLAIN NUT (6).
b. If pintle assembly (7) or pin (8) is
a. If nut (6) is tight, go to step 23. If
damaged or plugs (9) are missing, go to
nut is loose or missing, go to step 39.
step 39.
4-374
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals