 |
|||
|
|
|||
|
Page Title:
INSTALL Stationary SERVICE BRAKE PLATE |
|
||
| ||||||||||
|
|
 TM 9-2520-270-34
CAUTION
D o not install brake plates without
coating with transmission oil. Equipment
can be damaged.
CAUTION
D o not install brake plates without
49. INSTALL ROTATING SERVICE
coating with transmission oil. Equipment
BRAKE PLATE (4).
can be damaged.
a.
Coat plate (4) with transmission oil
NOTE
before assembly.
Plates should be installed in the same order
and facing same way as removed.
plate
(5) with
on
b.
carrier (6).
INSTALL Stationary SERVICE
Install plate (4) so it is facing
c.
BRAKE PLATE (1).
the same way as removed.
a. Coat plate (1) with transmission oil
before assembly.
REPEAT STEPS 48 AND 49 UNTIL
b.
plate tabs (2) with pins (3).
10 STATIONARY PLATES (1) AND
9 ROTATING PLATES (4) ARE
Install plate (1) so it is facing same
INSTALLED.
way as removed.
INSTALL WASHER
AND BOLT
2).
a. Coat threads of bolt (12) with sealant
compound.
b. Using 3/8-inch drive brace handle and
3/8-inch socket, install washer (11 )
and bolt (12) in hole (8).
51. INSTALL RETAINER PLATE (7).
a. Install plate (7) with bolt hole (8)
53. USING 3/8-l
DRIVE TORQUE
facing screw hole (9).
WRENCH AND 3/8-l
SOCKET,
TORQUE BOLT (12) TO 60-75 in-lb
b. Install retaining ring (10) with slot
(69-86
with bolt hole (8),
GO TO NEXT PAGE
4-333
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals