 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
9. T U R N RIGHT-HAND OUTPUT
CARRIER ASSEMBLY (1) OVER.
10. IF SPUR GEAR (2) WAS NOT
REMOVED, GO TO STEP 11.
IF SPUR GEAR WAS REMOVED,
GO TO STEP 12.
11. REMOVE SPUR GEAR (2).
a. Remove and discard Iockwire (3).
b. Using 3/8-inch drive ratchet handle
with extension and 7/16-inch socket,
remove four screws (4).
c. Remove gear (2).
12. REPLACE OUTPUT CARRIER
ASSEMBLY. RECORD FAILURE ON
DA FORM 2407 AND RETURN
DEFECTIVE CARRIER ASSEMBLY
TO DEPOT.
13. EFFORT IS COMPLETE. GO
TO END OF TASK.
14. C L E A N RIGHT-HAND OUTPUT
CARRIER ASSEMBLY (1).
a. Clean assembly and hardware. See
15. I N S P E C T RIGHT-HAND OUTPUT
CARRIER ASSEMBLY (1).
a. Inspect assembly and hardware. See
b. Replace output carrier assembly (1)
if damaged. Record failure on
DA FORM 2407 and return defective
output carrier assembly to depot.
16. I F RIGHT-HAND OUTPUT
CARRIER ASSEMBLY (1) WAS
REPLACED, GO TO END OF
TASK. IF NOT, GO TO STEP 17.
4-306
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals