 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
65. INSTALL LUBE BLOCK (1).
67. INSTALL ROLLER BEARING (5).
a. Position new gasket (2) and lube
a. Using screwdriver, install retaining
block (1),
ring (6) in gear (7).
b. Install two washers (3) and
b. Using arbor press and bearing
screws (4).
installer (Item 8), press
bearing (5) against ring (6).
66. USING 1/2-lNCH DRIVE TORQUE
WRENCH, TORQUE TWO SCREWS (4)
c. Using screwdriver, install second
TO 10-12 ft-lb (1-2 mkg).
retaining ring (6).
CAUTION
Beveled side of end plate must be installed
CAUTION
toward housing. End plate must be installed
Shaft shoulder must be installed by hand.
by hand. Damage to equipment can occur.
Damage to equipment can occur.
68. INSTALL GEAR (7).
69. INSTALL SHAFT SHOULDER (10).
a.
Install end plate (8) with beveled
a. Install shaft shoulder (10).
side (9) toward housing.
b . Using retaining-ring pliers (Item 59),
b.
Install gear (7).
install retaining ring (11).
GO TO NEXT PAGE
Change 1
4-249
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals