Click here to make tpub.com your Home Page

Page Title: CHECK FOUR CLUTCH SEPARATOR PLATE
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2520-270-34
10. IF PLATES WERE NOT REPLACED,
GO TO STEP 11. IF PLATES WERE
REPLACED, GO TO STEP 12.
11. CHECK FOUR CLUTCH
SEPARATOR PLATES (1).
a.
Using flat surface and feeler gage,
check plate (1) for warpage. Check
12.
CHECK EIGHT SPRINGS (2).
inside and outside edges in three
places.
a.
Using indicator caliper, measure
free length of each spring (2).
b.
Replace all eight plates if warpage
of any plate (1) is greater than
b.
Replace spring (2) if free length is not
0.010 inch (0.25 mm).
1.387-1.437 inches (35.23-36.50 mm).
ASSEMBLE
14. INSTALL PLUG (5) AND BALL (6).
a.
Install ball (6).
b.
Coat new preformed packing (7) with
transmission  oil.
c.
Install packing (7) on plug (5).
d.
Using 3/8-inch drive ratchet handle
13. CHECK HOUSING ASSEMBLY (3).
and 1/8-inch socket wrench attach-
a.
Using micrometer caliper set and
ment, install plug (5).
telescoping gage set, measure two
15. USING 3/8-lNCH DRIVE TORQUE
b.
Replace housing (3) if either diameter
W R E N C H AND 1/8-lNCH SOCKET
measures greater than 2.378 inches
W R E N C H ATTACHMENT, TORQUE
(60.40 mm).
PLUG (5) TO 50-60 in-lb (58-69 cmkg).
4-214

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business